 |
| Test Blocks |
|
 |
Aluminum Test Block
(For Sensitivity) (#14755)
- Cracked aluminum block
compares sensitivity of different penetrants or sensitivity of new and old penetrants
- Complies with ASTM E165;
AMS-2644; ASME Boiler and Pressure Vessel code, Section V, Article 6, Paragraph
T-647
|
 |
Stainless Steel Test
Block (For Washability) (#154400)
- Monitors washability of
water washable or post emulsifiable penetrants
- Grit-blasted rough surface
retains “background” when washability is impaired
- May be used repeatedly
if thoroughly cleaned after each use
- Complies with ASTM E165
and AMS-2644
|
 |
Indication
Marker (#42281)
-
Features medium tip for clear,
bold markings
-
Heavy duty aluminum body with
large paint capacity
-
Valve performance tip releases
paint as needed for continuous, non-skip markings
-
Makes permanent bright marks
on rubber, plastic, metal, glass, concrete, leather, stone, wood, vinyl
and more
-
Valve action mechanism prevents
paint in barrel from drying when cap is left off
-
Normal drying time: 25-35 seconds
|
 |
|
Teri-Wipers (#34790)
- Preferred wiper for Spotcheck®
Penetrant Inspection
- Teri-Wipers in pop-up box for
easy dispensing
- 150 wipers/box, 6 boxes/case
- Large size 9-3/4" x 16-1/2", to
cover any job
|
|
