 |
| Hand Sprayers |
|
 |
Water Spray Gun (#520090)
- For rinsing either water
washable or post emulsifiable penetrants
- Coarse spray
|
 |
Spray Wash Gun with Brass
Head (#518958-BH)
- Heavy duty spray wash
gun designed for extended use.
- The trigger lock eliminates
extended periods of hand pressure on the trigger.
- Includes brass head for
finer spray pattern.
|
 |
Spray Wash Gun (#518958)
- Heavy duty spray wash
gun designed for extended use.
- Trigger lock eliminates
extended periods of hand pressure on the trigger.
|
 |
Hydro-Wash Spray Gun
(#518992)
- For water rinsing of parts
- Air injection boosts
velocity and permits faster rinsing with less water usage
- Useful with low or fluctuating
water pressure
- Excellent for spray distances
over three feet and rinsing hollow or rough surface parts
Note: MIL-STD-6866
does not permit use of hydro-washing with levels of 3 or 4 sensitivity. Ensure
compatibility with specification before using this technique.
|
|
|
Portable Pressure Sprayer
(#195260)
- Lightweight pressure sprayer
for spot application of penetrants, developers and cleaners
- Includes interchangeable
nozzles for mist or pin spray
- Chrome-plated solid brass
construction
- One-quart capacity
- Pressurize with compressed
air or CO2 cartridges to a maximum of 200 psi
|
| Test Blocks |
|
 |
Aluminum Test Block (For
Sensitivity) (#14755)
- Cracked aluminum block
compares sensitivity of different penetrants or sensitivity of new and old penetrants
- Complies with ASTM E165;
AMS-2644A; ASME Boiler and Pressure Vessel Code, Section V, Article 6, Paragraph
T-647.2
|
 |
Stainless
Steel Test Block (For Washability) (#154400)
- Monitors washability of
water washable or post emulsified penetrants
- Grit-blasted rough surface
retains “background” when washability is impaired
- May be used repeatedly
if thoroughly cleaned after each use
- Complies with ASTM E165
and AMS-2644A
|
| Comparators |
|
| |
A) Crack
Comparator (#514048)
- General purpose crack
comparator in increments of 0.005" to 0.125"
B) TAM Crack Comparator
(#514050)
- Increments of 0.010"
to 0.180"
- Meets Pratt & Whitney
requirements (P&W reference: TAM135273)
|
 |
TAM Panel (#198055)
- 4" x 6" stainless
steel panel monitors both sensitivity and washability of penetrant process
- Includes a rough surface
for washability testing and a polished chrome section with 5 “star”
shaped defects (ranging in size from coarse to extremely fine) for sensitivity
analysis
- Pratt and Whitney standard
#146040
|
 |
Tam Panel Cleaning Kit (Part #
01-7500-00) Cleaning Kit Contains:
- A table-top (the size of a toaster) Ultrasonic cleaning
unit with a heater and timer
- One gallon of MagnaVu alkaline cleaner concentrate
- Complete Instructions
If your test panels aren't clean, you will not find
indications! |
 |
Round Wire Basket (#1962)
- 12" diameter, nylon-coated
processing basket
- Can be subdivided to prevent
part-to-part contact
- Fits turntable units with
automatic rotary wash
|
 |
|
Teri-Wipers (#34790)
- Preferred wiper for Zyglo®
Penetrant Inspection
- Teri-Wipers in pop-up box for
easy dispensing
- 150 wipers/box, 6 boxes/case
- Large size 9-3/4" x 16-1/2", to
cover any job
|
|
